These were for use in the Japanese casino and have been disabled. STEP 2 GETTING POWER TO MACHINE On most machines, there will be two slider type switches on the power supply that are labeled with Japanese writing. When the INSERT MEDAL light flashes, the machine is ready for play. The machine will go through a series of test procedures. STEP 4 TURNING MACHINE ON Turn the machine power switch (normally located inside of machine on left side) to the ON position. Inspect the interior for any loose wiring harnesses, caused by shipping.
On most machines, turning to the left clears error codes, but does not open the door. STEP 1 OPENING THE MAIN DOOR Unlock and open the front door with the key provided, by turning the key clockwise (to the right).
Loading the Hopper Insert at least 400 tokens into the top of the hopper, as this will load the hopper for payoffs. Press down to release hopper, then slide hopper out of track. Also, some machines have a mechanism located at the base of the hopper to help hold it in place.
If the hopper is connected to a wire harness be sure to disconnect it first. 1 Pachislo Slot Machine Operation Manual 1 Locate the payout hopper and remove it from the machine.
